Timing Belt and Cover for 2004 Dodge Stratus
Dowel Pin
Rear Main Oil Seal Retainer To Cylinder Block. Rear Crankshaft Oil Seal Retainer To Cylinder Block. Camshaft Cap To Cylinder Head. Item 13 Also Contained in Short Block Engine Kit. Front Timing Chain Case Cover To Cylinder Block. Camshaft Sprocket Locator. All Plugs And Dowel Pins Must Be Installed On Cylinder Block Before Installing Engine. Exhaust Cam. Camshaft Cap To Camshaft Carrier. [M4x14].
M6x1x18. Camshaft Sensor mounting. M6x1.001x18.00. Canshaft sensor attaching. Vehicle speed sensor. To Manifold. Balance Shaft Cover. Oil Level Indicator Tube To Engine Block.
Bedplate To Cylinder Block. Bedplate To Balance Shaft Carrier. Block To Cylinder Head.
M8x1.25x25. M8x1.251x25.00. Attach. Balance Shaft Gear.
M10x1.50x108. Balance Shaft Carrier To Engine Block. Balance Shaft Carrier To Cylinder Block.
Bolt, Carrier Attaching
Balance Shaft Carrier To Engine Block. M10x1.50x167.00. Balance Shaft Carrier To Cylinder Block.
Hex Head Screw And Washer, Chain Tensioner To Carrier
M6x1x35. Timing Belt Cover To Block Right Rear. M6x1.00x35.00. Chain Tensioner To Carrier Gear. Inner Cover To Cylinder Head.
M6x1.00x40.00. End Carrier Gear Cover. Carrier Gear Cover To Chain Guide.
Hex Nut-coned Washer Nut And Washer, Chain Guide
M6 x 1.00. Quantity of 6. Intermediate Shaft Bearing to Dash. Carrier Gear Cover To Chain Guide. To Stud. Water Return Tube Attach. I/P To Plenum. Turbo Coolant Return Tube To Cylinder Head Cover. Ignition coil mounting. Attaching.
M4.8 x 1.59 x 25.00. Amplifier mounting+. Outer.
M12x1.50x52. Camshaft Sprocket To Camshaft. Camshaft Gear To Camshaft.
13x35.00x4.70. Camshaft Gear To Camshaft. Camshaft Sprocket To Camshaft Mounting.
Bolt
[m10x1.50x50.00]. Idler To Cylinder Head. [M6x1.25x58.0]. Timing Belt Idler. Idler Attaching.
Used with Gear 4621918 Only. Used with Gear 4648939AA Only.
M12x1.75x87.50. Vibration Dampner To Crankshaft. Vibration Damper To Crankshaft.
Used with Damper 4694268 or 4694268AB. Used with Damper 4777618AE or 4777618AF. Used with Damper 4694268AB Only. Used with Damper 4777618AF Only. Timing.